IoT gateway công nghiệp 4G/5G 4*LAN, 1*WAN, Wi-Fi, Dual SIM, 2 AI, 2 DI, 1 CAN, 2 relay Alotcer AD7028D(T)

IoT gateway công nghiệp 4G/5G 4*LAN, 1*WAN, Wi-Fi, Dual SIM, 2 AI, 2 DI, 1 CAN, 2 relay Alotcer AR7091G

AR7091G is an industrial Internet of Things edge computing gateway /CPE/ water conservancy video RTU/ power communication management machine developed based on 5G/4G/3G/2G, WiFi, VPN technologies. The product adopts high-performance industrial 32-bit processor, with embedded operating system.

It supports 1 Gigabit Ethernet WAN/1 Gigabit SFP optical port (optional), 4 Gigabit Ethernet LAN ports (PoE is optional for 2), 1 RS232 (2 for enhanced model), 4 isolated RS485 (7 for enhanced model), 1 USB2.0, 1 Micro SD card, 1 rainfall collection, 1 AI, 2 DI, 2 relay, 2 controllable power supplies, 1 CAN bus, 2.4G/5.8G WiFi interface that can conveniently connect one device to a cellular network. It can be connected to serial device, Ethernet device and WiFi device at the same time.

It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.

Tính năng

• Dual 5G module, dual SIM card, 1 Gigabit WAN port/optical port, and 4 Gigabit LAN ports.
• 1 rainfall interface, 2 AI interfaces, 2 DI interfaces, 1 CAN interface, and 2 relay-controlled power supply interfaces.
• 2 RS232 interfaces, 7 RS485 interfaces, dual-band high-speed WIFI of 2.4/5Ghz frequency band, optional WIFI6.
• Optional GPS/Beidou/pulse signal input/output, base station/B code timing synchronization function, power encryption/public professional/eSIM.
• Special features: modular software and hardware architecture, supports custom I/O interface board customization.
• Complies with hydrological resources and environmental protection regulations such as those for the different provinces in China, MQTT protocol authentication, etc.
• Modbus RTU、Modbus TCP、OPC UA、Ntirp、DTU functions are supported.
• IPSEC, L2TP, PPTP, OpenVPN, GRE, DMVPN, etc.
• High-performance dual-core CPU, Linux system, supports Python, and C++ secondary development.
• Supports mainstream PLC protocols, and optional protocols like IEC101/104, DNP3.0/DLT645, etc.
• DC9~35V, input power consumption is less than or equal to 5.9 /5.7W without communication, and less than or equal to 6.5 /7.2W with communication (4G/5G).
• Working temperature -40 ~ +75ºC, the product size is 209x150x55 mm.

Thông số kỹ thuật

Interface description

WAN: 1 Gigabit Ethernet port (RJ45)/1 Gigabit SFP optical port (optional, the Ethernet and SFP cannot be used at the same time)

LAN: 4 Gigabit Ethernet LAN ports (RJ45, PoE is optional for 2)

User serial: 1 RS232 (Shared with RS485, 3.5mm terminal, 2 for enhanced model）, 4 isolated RS485 (3.5mm terminal, 7 for enhanced model)

Micro SD card: Standard self-propelled Micro SD card interface (Max 128GB)

USB: Standard USB2.0 Type-A, support USB storage

Antenna: Standard SMA female interface, 50 ohm

SIM/UIM: Standard 3V/1.8V user card interface, 15KV ESD protection

Power: Standard 2-PIN 3.81mm terminal, reverse-voltage and over voltage protection

Ground terminal: M3 Screw terminal

Reset Button: Press this key for 8 seconds to restore the module to its original factory default settings

Udometer: 1 rainfall collection (enhanced model)

AI: 2 analog input ports，supports 4-20mA or 0-5V (enhanced model)

DI: 2 optical isolation digital input ports (enhanced model)

Relay: 2 relay interfaces (enhanced model)

CAN: 1 CAN bus (compatible with ISO 11898 standard, enhanced model)

Power output: 2 controllable power supplies (single rated output current 1A, total rated output current 2A, built-in overcurrent protection, enhanced model)

LED: “PWR”, “RUN”, “SIM1”, “SIM2”, “Online”, “LAN1”, “LAN2”, “LAN3”, “LAN4”, “WAN”, “MOD1 Signal strength”, “MOD2 Signal strength”, “WiFi2.4”, “WiFi5.8”

GPS parameters (optional)

Receiver type(GPS): 72-channel GPS L1 (1575.42MHz) C/A code

Position: 2.5m

Max. Update Rate: 18Hz

Accuracy: 0.05m/s

Electrical parameters (standard model)

Power supply range: DC9~35V (12V DC recommended)

Communication current 1: <660mA @12V DC (One Module 4G)

Communication current 2: <680mA @12V DC (Dual Module 4G)

Max current: <1200mA @12V DC (Dual Module 5G)

Electrical parameters (enhanced model)

Power supply range: DC9~35V (12V DC recommended)

Communication current 1: <700mA @12V DC (One Module 4G)

Communication current 2: <740mA @12V DC (Dual Module 4G)

Max current: <1200mA @12V DC (Dual Module 5G)

Environmental parameters

Operating temperature: -35~+75ºC(-31~+167℉)

Storage temperature: -40~+85ºC(-40~+185℉)

Relative humidity: 95% (non-condensing)

Mechanical parameters

Dimensions: 209x150x55mm (excluding accessories)

Weight: 1575g (excluding accessories)

Supported frequency bands

5G NR SA/NSA:n1/2/3/5/7/8/12/20/28/41/66/71/ 77/78/79

TDD-LTE:B38/39/40/41

FDD-LTE:B1/2/3/4/5/7/8/13/17/20/25/28

WCDMA:850/900/1900/2100MHz

TD-SCDMA:1880-1920/2010-2025MHz(A/F)

CDMA2000 1x/ EVDO Rev. A:800/1900MHz

GSM/GPRS/EDGE:850/900/1800/1900MHz

CDMA:800/1900MHz

Thông tin đặt hàng

Tài liệu

Datasheet