| Industrial Design |
High-powered industrial cellular module |
| High-powered industrial 32bits CPU |
| Wide Operating Temperature(-35~+75ºC) |
| Power range: DC 5~60V |
| High Reliability |
Support hardware and software WDT |
| Support auto recovery mechanism, including online detect, auto redial when offline to make it always online |
| Ethernet port: 1.5KV magnetic isolation protection |
| RS232/RS485 ports:15KV ESD protection |
| SIM/UIM port: 15KV ESD protection |
| Power port: reverse-voltage and over voltage protection |
| large serial port data cache(10MB) ,ensure the data is not lost |
| Antenna port: lightning protection(optional) |
| Standard and Convenience |
Adopt terminal block interface, convenient for industrial application |
| Support standard two RS232(or RS232 and RS485) and Ethernet ports that can connect to serial devices directly |
| Support several work modes |
| Support intellectual mode, enter into communication state automatically when powered |
| Convenient configuration and maintenance interface |
| High-performance and Security |
Support TCP server |
| Support double data centers, one main and another backup |
| Support multi data centers and it can support 5 data centers at the same time |
| Support NTP, RTC embedded. |
| Support MAC address cloning. |
| Support dynamic domain name(DDNS) and IP access to data center |
| Design with standard TCP/IP protocol stack |
| Support APN/VPDN |
| Support local log storage. |
| Support dual SIM/UIM card (optional). |
| Support hardware encryption/decryption (optional) |
| Hardware System |
CPU |
Industrial 32 bits CPU |
| FLASH |
16MB (Extendable to 64MB) |
| SDRAM |
128MB |
| Interface |
Serial |
2 RS232 ports (or 1 RS232 and 1 RS485), 15KV
ESD protection
Serial port: 8PIN industrial terminal, 3.81mm pitch
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps
Large serial port data cache:10MB |
| LAN |
1 10/100Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
| Antenna |
Standard SMA female interface, 50 ohm |
| SIM/UIM |
Standard 3V/1.8V user card interface, 15KV ESD protection |
| Power |
Terminal block interface, reverse-voltage and over voltage protection |
| Reset |
Inside the module. Press this key for 8 seconds to restore the module to its original factory default settings |
| Indicator |
“POWER”、”MODULE”、”SIM”、”STATUS” |
| Network |
Wireless Network |
GSM/GPRS/EDGE: 850/900/1800/1900MHz
CDMA: 800/1900MHz
WCDMA/HSUPA/HSPA+: 850/900/1900/2100MHz
CDMA2000 1x/ EVDO Rev. A: 800/1900MHz
TD-SCDMA: 1880-1920/2010-2025MHz(A/F)
TDD-LTE:Band 38/39/40/41& Band 61/62 (Private Network)
FDD-LTE: Band1/2/3/4/5/7/8/12/13/17/18/19/20/21/25/26/28/66 |
| PPP Protocol |
Support PPP Protocol |
| PPP Heartbeat |
Maintaining links with the cellular network to prevent forced sleep, to ensure the stability of dial-up link. |
| Network Authentication |
Support CHAP/PAP Authentication |
| TCP Heartbeat |
Monitor the server connection |
| Power supply |
Power range |
DC 5~60V, Recommended 12VDC |
| Communication Current |
<410mA (@12VDC) |
| Standby Current |
<250mA（@12VDC） |
| Physical |
Shell Material |
ABS |
| Dimensions |
108.43x85x40.7mm |
| Weight |
126g |
| Installation |
Mount Kit or DIN Rail 35mm (optional) |
| Environmental Limits |
Operating Temperature |
-35~+75ºC (-31~+167℉) |
| Storage Temperature |
-40~+85ºC (-40~+185℉) |
| Operating Humidity |
95% ( unfreezing) |
