Thiết bị truyền thông công nghiệp
Trang chủ » Sản phẩm » Switch Công Nghiệp » Switch công nghiệp EN50155 » TNS5800-20GT-2P110

TNS5800-20GT-2P110: Switch công nghiệp quản lý layer 3 EN50155 20 cổng Gigabit M12 3Onedata

Sản phẩm còn hàng.

Code: TNS5800-20GT-2P110 Lượt xem: 265

Giá: Liên hệ

Giá để tham khảo, Mua SL liên hệ có giá tốt hơn

Hoàn tiền 10 lần nếu phát hiện hàng kém chất lượng.
Uy tín, danh tiếng hơn 10 năm trên thị trường viễn thông.
Giao hàng chuyển phát nhanh toàn quốc
Đại diện phân phối chính thức tại Việt Nam

Hotline/Zalo: 0904251826

Nếu bạn ngại đặt mua sản phẩm HÃY GỌI ĐIỆN chúng tôi sẽ giúp bạn!

Hà Nội: Số 8, Liền Kề 12, Ngô Thì Nhậm, Phường Hà Cầu, Quận Hà Đông, Thành Phố Hà Nội, Việt Nam

NÓI CHUYỆN, GỌI ĐIỆN VỚI KINH DOANH QUA ZALO CHAT
Chia sẻ:

TNS5800-20GT-2P110 là Switch công nghiệp EN50155 quản lý layer 3 (EN50155 12-port Layer 3 Managed Ethernet Switches) với 20 cổng Gigabit M12 của hãng 3Onedata. Sản phẩm này đáp ứng tiêu chuẩn công nghiệp EN50155 và EN50121

TNS5800 series hỗ trợ nhiều giao thức mạng và tiêu chuẩn công nghiệp khác nhau như Static Route, RIP, OSFP, VRRP, BGP, STP/RSTP/MSTP, 802.1Q VLAN, QoS, DHCP Server, DHCP Client, IGMP Static Multicast, LLDP, Port Trunking, Port Mirroring, v.v. Nó cũng sở hữu các chức năng quản lý hoàn chỉnh bao gồm  Port Configuration, Port Statistics, Port IP Binding, Access Control, 802.1X Authentication, Network Diagnosis, Rapid Configuration, Online Upgrading, CLI, WEB, Telnet, SNMP và các phương pháp truy cập khác. Sản phẩm cung cấp cho người dùng trải nghiệm tốt với thiết kế thân thiện của giao diện hệ thống quản lý mạng, vận hành đơn giản và thuận tiện.

Khi cổng bị lỗi liên kết, đèn báo ALARM sẽ sáng và gửi cảnh báo, trong khi đó, thiết bị báo động được kết nối với rơ le sẽ gửi cảnh báo để xử lý sự cố hiện trường nhanh chóng.

Phần cứng sử dụng thiết kế không quạt, tiêu thụ điện năng thấp, nhiệt độ và điện áp rộng và đã vượt qua các thử nghiệm tiêu chuẩn công nghiệp nghiêm ngặt, có thể phù hợp với môi trường công nghiệp với các yêu cầu khắc nghiệt đối với EMC. Sản phẩm được thiết kế đặc biệt cho ngành vận tải đường sắt và có thể được sử dụng rộng rãi trong PIS gắn trên xe, CCTV, Giám sát video, Điều khiển tàu và các hệ thống khác.

Thông số kỹ thuật

Standard & Protocol IEEE 802.3 for 10Base-T

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE 802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

IEEE 802.3ad for LACP

Management SNMP v1/v2c/v3 Centralized Management of Equipment, RMON,

Port Mirroring, QoS, LLDP, DHCP Server, File Management, Log Management, Port Statistics, Static ARP

Security Classification of User Permissions, Anti-attack Control, ACL, 802.1X Authentication, Radius Server Authentication, Port Alarm, Storm Suppression, SSHD Configuration, Telnet Configuration, HTTPS Configuration
Switch Function 802.1Q VLAN, Static/Dynamic Port Aggregation, Bandwidth Management, Flow Control, Port Isolation
Unicast / Multicast Static Multicast, GMRP, IGMP-Snooping
Redundancy Protocol SW-Ring, STP/RSTP
Troubleshooting Ping, Traceroute, Port Loopback
Route VRRP, RIP, OSPF, BGP
Time Management SNTP
Interface 100M M12: 10/100Base-T(X), M12 (Female), 4-Pin D-Coded, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning

Gigabit M12: 10/100/1000Base-T(X), M12 (Female), 8-Pin A-Coded or 8-Pin X-Coded, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning

Console port: CLI command line management port (RS-232), RJ45 (rack-mounted) or M12 (wall mounting)

Alarm port: 3-pin 5.08mm pitch terminal blocks (rack-mounted), 7-pin female M23 port (rack-mounted) or M12 (wall mounting), support 1 relay alarm output, current carrying capacity 5A@30VDC or 10A@125VAC

LED Indicator Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator
Switch Property Transmission mode: store and forward

MAC address: 16K

Packet buffer size: 12Mbit

Backplane bandwidth: 128G

Switch time delay: < 10μs

Power Requirement TNS5800-4GT-8T-P110

l 110VAC/DC (100~240VAC/DC), 3-pin 5.08mm pitch terminal blocks; support 8A overcurrent protection;

TNS5800-12GT-2P110

l 110VAC/DC(100~240VAC/DC), dual power supply, 3-pin 5.08mm pitch terminal blocks; support 6A overcurrent protection;

TNS5800-20GT-2P110

l 110VAC/DC (100~240VAC/DC), 7-pin M23 power supply port;

TNS5800-20GT-2P24

l 24VDC, 7-pin M23 power supply port;

TNS5800D-4GT-8T

l 110VDC (70~160VDC), M12 (Male), 4-pin A-Coded;

Power Consumption
Model No-load Full-load
TNS5800-4GT-8T-P110 14.30W@110VDC 14.85W@110VDC
TNS5800-12GT-2P110 13.0W@110VDC 14.3W@110VDC
TNS5800-20GT-2P110 15.4W@110VDC 17.9W@110VDC
TNS5800-20GT-2P24 13.6W@24VDC 16.3W@24VDC
TNS5800D-4GT-8T 14.30W@110VDC 14.85W@110VDC
Environmental Limit TNS5800-4GT-8T-P110, TNS5800D-4GT-8T

l Operating temperature range: -40~75℃

l Storage temperature range: -40~75℃

l Relative humidity: 5%~95% (no condensation)

TNS5800-12GT-2P110

l Operating temperature range: -40~70℃

l Storage temperature range: -40~70℃

l Relative humidity: 5%~95% (no condensation)

TNS5800-20GT-2P110, TNS5800-20GT-2P24

l Operating temperature range: -40~75℃

l Storage temperature range: -40~85℃

l Relative humidity: 5%~95%(no condensation)

Physical Characteristic TNS5800-4GT-8T-P110

l Housing: IP40 protection, metal

l Installation: 1U rack-mounted

l Dimension (W x H x D): 441.6mm×44.45mm×290mm

l Weight: 4.42kg

TNS5800-12GT-2P110

l Housing: IP40 protection, metal

l Installation: 1U rack-mounted

l Dimension (W x H x D): 441.6mm×44.45mm×290mm

l Weight: 4.09kg

TNS5800-20GT-2P110, TNS5800-20GT-2P24

l Housing: IP40 protection, metal

l Installation: 1U rack-mounted

l Dimension (W x H x D): 441.6mm×44.45mm×290mm

l Weight: 4.22kg

TNS5800D-4GT-8T

l Housing: IP30 protection, metal

l Installation: wall mounting

l Dimension (W x H x D): 180mm×170mm×60.2mm

l Weight: 2.06kg

Industrial Standard IEC 61000-4-2 (ESD) ,Level 3

l Air discharge: ±8kV

l Contact discharge: ±6kV

IEC 61000-4-4 (EFT), Level 3

l Power supply: ±2kV

l Ethernet interface: ±1kV

l Relay: ±2kV

IEC 61000-4-5 (Surge),Level 3

l Power supply: common mode ±2kV, differential mode ±1kV

l Ethernet interface: ±2kV

l Relay: common mode ±2kV, differential mode ±1kV

IEC 61000-4-6 (CS),Level 3

l Test level: 10V

l Frequency range: 150kHz-80MHz

IEC 61000-4-8 (PFMF),Level 4

l Power frequency: 50Hz

l Continuous magnetic field strength: 30A/m

l Short-term magnetic field strength: 300A/m

Shock: IEC 61373

Free fall: IEC 60068-2-32

Vibration: IEC 61373

Certification CE, FCC, RoHS, EN50155, EN50121-3-2

Thông tin đặt hàng

Available Models Gigabit M12 100M M12 Power Supply Range Installation Method
TNS5800-4GT-8T-P110 4 8 110VAC/DC (100~240VAC/DC) 1U rack-mounted
TNS5800-12GT-2P110 12 110VAC/DC (100~240VAC/DC)
TNS5800-20GT-2P110 20 110VAC/DC
TNS5800-20GT-2P24 20 24VDC
TNS5800D-4GT-8T 4 8 110VDC (70~160VDC) Wall mounting
Datasheet