Mô tả

Bộ chuyển đổi RS-232/422/485 sang CAN ICP DAS tM-7530A CR

Feature

  • Compatible with CAN specification 2.0A and 2.0B
  • Fully compatible with ISO 11898-2 standard
  • Support various CAN baud rate from 10K bps to 1M bps
  • Support user-defined CAN baud rate
  • Support various UART baud rate from 110 bps to 230400 bps
  • Build-in selectable 120 Ω terminal resistor
  • Software configurable CAN and UART communication parameters
  • Power, data flow, and error indicator for CAN and UART
  • Watchdog inside
  • Support pair connection mode
  • Software buffer on CAN bus side and UART side
  • Support user-defined end of characters on pair connection mode
  • Support listen only mode · Support time stamp response on UART side

Introduction

ICP DAS has provided a lot of UART/CAN product solutions which are widely recommended in the market. These UART/CAN converters can help users to implement the communication between UART and CAN network. In order to cater for costing requirement, we provide a new solution of UART /CAN converter-tM-7530A. The tM-7530A is a tiny UART/CAN converter to fit narrower environment as a result of its small size. It has isolation on power side and on CAN bus side and its performance is faster than other UART/CAN module. The function of tM-7530A can full compatibly with I-7530 and I-7530T. In additional, it provides new function such as listen only. User can use this function to listen CAN bus messages and error detection. According to above features, tM-7530A is an economical and practical UART/CAN converter solution.

Moreover, we expand the functionalities of tM-7530A for some special application. In pair connection mode, tM-7530A can be used to connect PC with other UART devices at the same time. The application architecture may be as follows.


Application

• Control System
• Building Automation
• Factory Automation
• Distributed data acquisition

Specifications

LED Indicators
Status 1 x Run LED: Power and Data Flow
1 x Err LED: Error
COM Ports
Ports 1 x RS-232
1 x RS-485 (self-tunner ASIC inside)
1 x RS-422 (self-tunner ASIC inside)
(these ports can’t be used simultaneously)
Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bps
Parity None, Even, Odd
Data Bit 5, 6, 7, 8
Stop Bit 1, 2
CAN
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Build-in selectable 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter Yes
Power
Input Range +10 VDC ~ +30 VDC
Consumption 1 W
Mechanical
Casing Plastic
Dimensions (mm) 52 x 93 x 27 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

tM-7530A     CR  Intelligent tiny UART/CAN converter (RoHS)
Đăng nhập
Đăng ký
Hotline: 0904251826
x