| Software Functions |
| TSN Time Sensitive Network Standards |
Supports IEEE 802.1AS PTP
Supports IEEE 802.1Qbv
Supports IEEE 802.1Qcc
Supports IEEE 802.1Qav |
| Switching |
Supports VLAN, PVLAN
Supports Flow Control
Supports Port Rate Limit, Broadcast, Multicast, Unknown Unicast Storm protection
Supports static and dynamic MAC address aging |
| Redundancy |
Supports RSTP/MSTP
Supports DRP, network recovery time <20ms
Supports LACP (IEEE802.3ad) |
| Multicast |
Supports IGMP snooping
Supports GMRP
Supports Static Multicast |
| Security |
Supports IEEE 802.1x
Supports HTTPs/SSL
Supports SSH
Supports local RADIUS server, remote RADIS Server forwarding
Supports TACACS+
Supports unicast MAC filter |
| QoS |
Supports ACL
Supports Port based or protocol based QoS
Supports 802.1p TOS/DiffServ, Supports SP, WRR |
| Maintenance & Management |
Supports Console, Telnet, WEB
Supports SNMPv1/v2c/v3
SNMPv3 Supports DES & AES
Supports TCP/UDP, Ping, Trace route
Supports firmware upgrade and configuration backup via FTP/TFTP/SFTP/HTTP/HTTPs
Supports port mirroring and remote port mirroring
Supports LLDP and LLDP MIB (802.1ab)
Supports configurable MTU |
| Diagnosis |
Supports hardware self-diagnosis
Supports IP/MAC conflict alarm, power alarm, port alarm and Ring alarm
Supports Syslog |
| IP Management |
Supports IPv4
Supports DHCP server/option12
Supports Port Security over DHCP
Supports DHCP-relay-agent/option 82/61/66/67
Supports BOOTP/Bootstrap
Supports DHCP Relay Agent Information Option, Supports DHCP Client
Supports ARP |
| Time Management |
Supports hardware based IEEE1588 PTP
Supports SNTP client
Supports NTP client |
| Technical Specifications |
| Standard |
IEEE 802.3i (10Base-T)
IEEE 802.3u (100Base-T and 100Base-FX)
IEEE 802.3ab (1000Base-T)
IEEE 802.3z (1000Base-SX/LX)
IEEE1588 (PTP V2)
IEEE 802.1AS
IEEE 802.1Qbv
IEEE 802.1Qcc
IEEE 802.1Qav |
| Switching |
Priority Queue: 8
Number of VLANs: 4K
VLAN ID 1~4094
Number of Multicast Groups 8K
MAC Table 16K
Packet Buffer 1Mbit
Packet Forwarding Rate 47.6Mpps
Switching Delay <5μs
Jumbo Frame 9.6Kbytes |
| Interface |
2×10GBase-X SFP+;4×100/1000Base-X SFP; 8×10/100/1000Base-T(X) RJ45
Console: RS232 RJ45
Alarm contact: 3-pin 5.08mm terminal block,250VAC/220VDC Max, 2A Max |
| LED |
Running LED: Run
Alarm LED: Alarm
Power LED: PWR1,PWR2
Ring LED: Ring
Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT(Fiber port) |
| Button |
Reset: Reboot and restore default configuration |
| Power |
Power input voltage:
L2 = 24-48VDC(18-72VDC)
HV = 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC)
Power Terminal
5-pin 5.08 mm-spacing plug-in terminal block (L2)
3-pin 7.62 mm-spacing plug-in terminal block (HV)
Power Consumption <25W
Overload Protection Support
Reverse Protection Support
Redundancy Protection Support |
| Physical Characteristics |
Housing: Metal
Cooling Natural convection, fanless
Protection Class IP40
Weight: <1.25Kg
Mounting DIN-Rail or Panel Mounting |
| Environmental Limit |
Operating Temperature -40℃～+85℃
Storage Temperature -40℃～+85℃
Ambient Relative Humidity 5～95% (non-condensing) |
| Warranty |
MTBF >300000h
Warranty 5 years |
| Industrial Standard |
EMI
FCC CFR47 Part 15,EN55022/CISPR22,Class A
EMS
IEC61000-4-2(ESD) ±8kV(contact),±15kV(air)
IEC61000-4-3(RS) 10V/m(80MHz～2GHz)
IEC61000-4-4(EFT) Power Port: ±4kV;Data Port: ±2kV
IEC61000-4-5(Surge) Power Port: ±2kV/DM,±4kV/CM;Data Port: ±2kV
IEC61000-4-6(CS) 10V(150kHz～80MHz)
Mechanical
IEC60068-2-6(vibration)
IEC60068-2-27(shock)
IEC60068-2-32(free fall)
IEC61850-3 |
