NSM-206PSE CR: Bộ chuyển mạch công nghiệp 6 cổng Ethernet PoE (PSE) ICP DAS
NSM-206PSE là một bộ chuyển mạch 6 công nghiệp cổng (Power over Ethernet) Ethernet trên các công 1-4. Bộ chuyển mạch này
được phân loại như thiết bị nguồn (PSE), và khi được sử dụng ở cách này, NSM-206PSE biến việc cấp điện tập trung thành hiện thực và cung cấp lên tới 30w cho mỗi cổng PSE. NSM-206PSE có thể được sử dụng với các thiết bị tiêu chuẩn IEEE 802.3af/at (PD)

Tính năng chung:
- 4 cổng có khả năng PoE/PoE+ PSE, hoàn toàn tuân thủ IEEE 802.3af/at
- Lên tới 30w mỗi cổng PoE ở nguồn đầu vào 24~57 VDC
- Phân tần MDI/MDI-X tự động cho plug-and-play
- Full duplex IEEE 802.3x và half duplex điều khiển luồng áp suất ngược
- Hỗ trợ nhiệt độ hoạt động từ -40 °C ~ +75 °C
- Nguồn đầu vào 12~57 VDC nguồn đầu vào dự phòng
- Bảo vệ chống bão phát sóng
- Gắn DIN-Rail, gắn tường ( tùy chọn)
Thông số kỹ thuật
LED Indicators | |
---|---|
Status | PWR1, PWR2, POE, Link/Act, Speed |
Ethernet | |
---|---|
Ports | 6 x RJ-45, 10/100Base-TX |
Standards | IEEE 802.3 for 10 Base-T IEEE 802.3u for 100 Base-TX IEEE 802.3x for Flow Control, Back Pressure Flow Control IEEE 802.3af Power Over Ethernet IEEE 802.3at Power Over Ethernet Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
Processing Type | Store & forward; wire speed switching |
MAC Addresses | 2048 |
Frame Buffer Memory | 768 Kbit |
Isolation | 1500 Vrms 1 minute |
DIP Switch | Broadcast Storm protection |
PoE Technology | |
---|---|
PoE Compliance | 100% IEEE 802.3at compliant |
PoE Power | Up to 30 watts per channel |
PoE Operation | Automatic detection and power management |
PoE Pin Assignments | V+ (pin 1, 2), V-(pin 3, 6) |
PoE Disconnect Mode | DC disconnect |
PoE Voltage | +52 VDC |
Power | |
---|---|
Reverse Polarity Protection | Yes |
Input Range | 12 ~ 57 VDC Redundant dual Input |
Redundant Power Inputs | Yes |
Consumption | 0.125 A @ 12 VDC without PD loading, 6.2A @ 24VDC with PD full loading (15.4W per ports) 0.15 A @ 24 VDC without PD loading, 5.8A @ 24VDC with PD full loading (30W per ports) 0.10 A @ 48 VDC without PD loading, 2.9A @ 48VDC with PD full loading (30W per ports) |
Mechanical | |
---|---|
Casing | Metal |
Dimensions (mm) | DIN-rail mounting: 28 x 160 x 119 (W x L x H) Wall mounting: 28 x 199 x 112 (W x L x H) |
Installation | DIN-rail mounting or wall mounting (optional) |
Environmental | |
---|---|
Operating Temperature | -40 °C ~ +75 °C |
Storage Temperature | -40 °C ~ +85 °C |
Humidity | 10% ~ 90% RH, non-condensing |
Đặt hàng
NSM-206PSE CR | 6-port 10/100 Mbps PoE(PSE) Ethernet Switch (RoHS) |