Switch công nghiệp 4 cổng Ethernet + 2 cổng Quang (Dual Fiber, Single Mode, SC, 60KM) ICP DAS NS-206AFCS-60T CR

Chia sẻ:
Mã sản phẩm: NS-206AFCS-60T
Thương hiệu: ICP DAS
Tình trạng:

4-port 10/100 Mbps Ethernet with 2 fiber ports Switch (Single mode 60 km, SC Connector)

Liên hệ
Mô tả

Switch công nghiệp 4 cổng Ethernet + 2 cổng Quang (Dual Fiber, Single Mode, SC, 60KM) ICP DAS NS-206AFCS-60T CR

Feature

  • Provides 2 x 100-FX fiber ports plus 4 x Ethernet ports
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • Automatic MDI/MDI-X crossover for plug-and-play
  • Store-and-forward architecture
  • Redundant dual +12 ~ 48 VDC power inputs
  • Single-mode, SC Connector Fiber supports
  • Broadcast Storm protection

Introduction

The NS-206AFCS-60T is a 4-port unmanaged Ethernet with 2 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 60 km) transmissions. The NS-206AFCS-60T provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

Application

Specifications

EMS Protection
ESD (IEC 61000-4-2) ± 4 kV Contact
LED Indicators
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ethernet
Ports 4 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Isolation 1500 Vrms 1 minute
Fiber
Ports 2 x 100 Base-FX, SC connector
Mode Single-Mode
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output -5 dBm Min.
0 dBm Max.
RX Sensitivity -35 dBm
RX Overload -5 dBm
Budget 30 dBm
Power
Reverse Polarity Protection Yes
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.14 A @ 24 VDC
Alarm Output Yes,Relay 2 A @ 30 VDC
Mechanical
Casing Plastic
Dimensions (mm) 31 x 157 x 123 (W x L x H)
Installation DIN-Rail Mounting
Environment
Operating Temperature -30 °C ~ +75 °C
Storage Temperature -40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

NS-206AFCS-60T     CR  Single-mode 60 km, SC Connector, 4-port 10/100 Mbps with 2 Fiber ports Switch (RoHS)
Đăng nhập
Đăng ký
Hotline: 0904251826
x