NS-205PSE CR: Bộ chuyển mạch công nghiệp 5 cổng Ethernet PoE (PSE) ICP DAS
NS-205PSE là một bộ chuyển mạch 5 công nghiệp cổng (Power over Ethernet) Ethernet; nó hỗ trợ 4 cổng PoE được phân loại như thiết bị nguồn (PSE). NS-205PSE biến việc cấp điện tập trung thành hiện thực và cung cấp lên tới 15.4 w cho mỗi cổng PSE.
Tính năng chung:
• Phân tần MDI/MDI-X tự động cho plug-and-play
• Full duplex IEEE 802.3x và half duplex điều khiển luồng áp suất ngược
• Hỗ trợ nhiệt độ hoạt động từ -40 °C ~ +75 °C
• Mỗi cổng hỗ trợ cả 2 tốc độ 10/100 Mbps tự đàm phán
• Nguồn đầu vào +46 VDC ~ +55 VDC
• Kiến trúc lưu trữ và chuyển tiếp
• IEEE 802.3af tuân thủ các cổng PoE
• Đóng gói nhỏ gọn phù hợp với gắn DIN-Rail của bạn
Thông số kỹ thuật
LED Indicators |
Status |
Power, Link/Act , 10/100M, Power Device is detected |
Ethernet |
Ports |
5 x RJ-45, 10/100Base-TX |
Standards |
IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet) |
Processing Type |
Store & forward; wire speed switching |
MAC Addresses |
2048 |
Frame Buffer Memory |
768 Kbit |
Flow Control |
IEEE 802.3x flow control, back pressure flow control |
Isolation |
1500 Vrms 1 minute |
PoE Technology |
PoE Compliance |
100% IEEE 802.3af compliant |
PoE Power |
Up to 15.4 watts per channel |
PoE Operation |
Automatic detection and power management |
PoE Pin Assignments |
V+ (Pin 1, 2), V- (Pin 3, 6) |
PoE Disconnect Mode |
DC disconnect |
PoE Voltage |
+48 VDC depending on power input |
Power |
Reverse Polarity Protection |
Yes |
Input Range |
+46 VDC ~ +55 VDC |
Consumption |
0.05 A @ 48 VDC without PD loading
1.45 A @ 48 VDC with PD full loading |
Mechanical |
Casing |
Plastic |
Dimensions (mm) |
33 x 107 x 78 (W x L x H) |
Installation |
DIN-Rail Mounting |
Environmental |
Operating Temperature |
-40 °C ~ +75 °C |
Storage Temperature |
-40 °C ~ +85 °C |
Humidity |
10% ~ 90% RH, non-condensing |
Đặt hàng
NS-205PSE CR |
Unmanaged 5-port 10/100 Mbps PoE (PSE) Ethernet Switch (RoHS) |