|
Software |
|
Network Management Function |
Support traffic statistics, operating status, network status, local address and other status information or wireless information
Support routing mode, AP mode, relay mode, bridge mode, client mode
Support static address, DHCP, PPPoE external network connection
Support DHCP server, IP/MAC binding, wireless user black and white list
Support IP address conflict detection
Support static routing
Support peanut shell intranet penetration, dynamic DNS, SNMP, LLDP
Support PPTP/L2TP/GRE/TUN/TAP protocol VPN client
Support PPTP/L2TP/IPSec protocol VPN server |
|
Firewall |
Support SYN-flood defense, IP dynamic camouflage, MSS clamping, inbound/outbound data control
Support WAN/LAN port TCP/UDP port mapping
Support IP/MAC/domain name filtering, iptables, DMZ, UPnP |
|
Systems Management |
Support IPv4/IPv6 Ping, IPv4/IPv6 Traceroute, Nslookup, and capture network packets
Support time zone, NTP client/server, Crontab, remote/local log
Support user rights management, SSH
Support online restart, scheduled restart, configuration backup/restore, firmware flash, and factory settings restore |
|
Wi-Fi RF Parameters |
|
Wireless Standards |
Wi-Fi 6 6th generation wireless network technology
2.4GHz 802.11b/g/n/ax
5GHz 802.11a/n/ac/ax |
|
Modulation |
DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM, 1024-QAM |
|
Maximum Transfer Rate
(Theoretical value) |
2.4GHz:574Mbps
5GHz:2402Mbps |
|
Maximum Transmit Power |
2.4GHz:
- +17dBm HE40 at -47dB DEVM
- +22dBm HE40 at -43dB DEVM
- +24.5dBm MCS9 HT40 at -35dB DEVM
- +26dBm MCS7 HT20/40 at -30dB DEVM
- +28dBm MCS0 HT20
5GHz：
- +19dBm MCS11 HE160 at -43dB DEVM
- +16dBm MCS11 HE80 at -47dB DEVM
- +18dBm MCS11 HE80 at -43dB DEVM
- +23dBm MCS9 VHT80 at -35dB DEVM
- +24dBm MCS7 HT20/40 at -30dB DEVM
+26dBm MCS0 HT20 |
|
Receiving Sensitivity |
2.4GHz:
- -69.0dBm (VHT40/ MCS9/ 2SS)
- -63.0dBm (VHT40/ MCS11/ 2SS)
- -68.5dBm (HT40/ MCS9/ 2SS)
- -63.0dBm (HE40/ MCS11/ 2SS)
5GHz:
- -64.5dBm (VHT80/ MCS9/ 2SS)
- -59.0dBm (VHT80/ MCS11/ 2SS)
- -64.0dBm (HE80/ MCS9/ 2SS)
- -58.0dBm (HE80/ MCS11/ 2SS)
-58dBm (HE160/ MCS9/ 2SS) |
|
Specifications of Ports |
MIAP7200-2N25-GF-4GT |
MIAP7200-2N25-5GT |
|
1000M WAN |
1*1000Base-X Gigabit WAN/LAN SFP port |
1*10/100/1000Base-T(X) auto-sensing Gigabit WAN/LAN RJ45 port, supports full/half duplex, auto MDI/MDI-X; supports standard PoE power supply, compliant with IEEE802. 3af/at standard |
|
1000M LAN |
4*10/100/1000Base-T(X) auto-sensing Gigabit LAN ports, using RJ45, supporting full/half duplex, Auto MDI/MDI-X |
|
Antenna Connector |
2*2.4GHz/5GHz antenna interface, using SMA-K (external thread and internal hole) |
|
CONSOLE |
1 CONSOLE port, RS232 signal RJ45 port, used for equipment debugging |
|
Button |
Restart or restore factory settings with one click |
|
Indicator |
Power indicator, operation indicator, WiFi indicator light, interface indicator,Bridge indicator, PoE indicator (5GT model), Ethernet interface indicator. |
|
Power Supply |
MIAP7200-2N25-GF-4GT |
MIAP7200-2N25-5GT |
|
Power Input |
DC12~60V, dual power supply redundancy |
DC12~60V, dual power supply redundancy
(The WAN port supports standard PoE power reception.
Comply with IEEE802.3af/at standard) |
|
Full load Power Consumption |
＜14.5W@DC12V |
＜12.5W@DC12V |
|
Connection Method |
5.08mm pitch 2PIN terminal block |
|
Power Protection |
No polarity |
|
Physical Characteristics |
|
Dimensions |
140×54×110(mm) |
|
Installation Method |
Easy installation on 35mm DIN rails |
|
Chassis Protection |
IP40 |
|
Weight |
About 0.4kg |
|
Working Environment |
|
Operating Temperature |
-40℃~+70℃ |
|
Storage Temperature |
-40℃~+85℃ |
|
Relative Humidity |
5%~95% (non-condensing) |
|
Industry Standard |
|
EMC |
IEC 61000-4-2 (ESD): Level 4
IEC 61000-4-5 (Surge): Level ※The network port supports 6kV lightning protection
IEC 61000-4-4 (EFT): Level 4 |
|
Certification |
CE, FC, RoHS |
