Bộ chuyển đổi USB sang 2 cổng CAN/CAN FD Bus ICP DAS I-7565M-FD CR
Feature
- Compatible with USB 2.0 (High Speed)
- Compatible with the ISO 11898-2 standard
- Compatible with CAN specification 2.0 A/B and FD
- CAN FD support for ISO and Non-ISO (Bosch) standards switchable
- CAN FD bit rates for data field from 100 kbps to 10000 kbps
- Support CAN Bus message filter configuration
- Time stamp resolution 1ms.
- Voltage supply via USB
- Watchdog inside
- Built-in dip-switch to select 120 ohm terminal resister for CAN Bus
- Support firmware update via USB
- Provide utility tool for users module setting and CAN Bus communication testing conveniently
- Provide API library for user program development
Introduction
I-7565M-FD is a USB to CAN/CAN FD (CAN with Flexible Data-Rate) converter with two CAN channels. It allows transmitting/receiving CAN/CAN FD frames and supports CAN2.0A/2.0B and CAN FD (ISO/Bosch) specifications and different baud rates for CAN/CAN FD frame. (10 kbps to 1000 kbps for CAN arbitration phase and 100 kbps to 10000 kbps for CAN FD data phase). When connecting I-7565M-FD to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN Bus network easier and quicker by applying I-7565M-FD. The application fields can be CAN Bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc. The following is the application structure for the USB to CAN/CAN FD module. The PC can be the CAN host, monitor or HMI to access/control the CAN/CAN FD devices through the CAN network by the I-7565M-FD Converter. The module let users to communicate with CAN/CAN FD devices easily from PC with USB interface.
Application
- Factory Automation
- Building Automation
- Home Automation
- Control System
- Monitor System
- Vehicle Automation
Specifications
| Software |
| SDK |
C#.Net, VB.Net, VC++.Net |
| LED Indicators |
| Status |
1 x Power
1 x Module status
4 x CAN status |
| USB |
| Specification |
USB 2.0 High Speed (480Mbps) |
| Connector |
1 x USB (Type B) |
| Driver |
Built-in Windows 7/8.1/10/11 |
| CAN |
| Ports |
2 |
| Baud Rate |
CAN bit rates: 10 k ~ 1 M bps,
CAN FD bit rates for data field: 100 k ~ 10M bps (*Note1) |
| Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for photocoupler |
| Terminal Resistor |
DIP switch for the 120 Ω terminal resistor |
| Specification |
ISO 11898-2, CAN 2.0 A/B and FD |
| Filter |
Yes |
| Receive Buffer |
128 data frames |
| Data Flow |
3000 fps for Tx/Rx (Total CAN ports) |
| Power |
| Input Range |
USB power delivery |
| Consumption |
1.5 W |
| Mechanical |
| Casing |
Metal |
| Dimensions (mm) |
111 x 102 x 27 (W x L x H) |
| Installation |
Wall Mount |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +80 °C |
| Humidity |
10 ~ 90% RH, Non-condensing |
Specification Memo
Note1: The maximum CAN FD data rate can be exceeded depending on the concrete operating conditions (cable length, network topology, settings,...), but it can also not be reached.
Download
Datasheet
Documents
Ordering Information
| I-7565M-FD CR |
USB to 2-port CAN/CAN FD Converter (Metal Case) (RoHS) |
