Bộ lập trình điều khiển CAN ICP DAS I-7188XBD-CAN-G CR

Chia sẻ:
Mã sản phẩm: I-7188XBD-CAN-G
Thương hiệu: ICP DAS
Tình trạng:

I-7188 CAN Programmable Controller

Liên hệ
Mô tả

Bộ lập trình điều khiển CAN ICP DAS I-7188XBD-CAN-G CR

Feature

  • 2500Vrms photo-isolation protection
  • Compatible with CAN specification 2.0 parts A and B
  • Programmable transfer rate up to 1 Mbps
  • Jumper select 120Ω terminal resistor for CAN channel
  • 64-bit hardware unique serial number inside
  • COM driver support interrupt & 1KB QUEUE input buffer
  • COM port: COM1, COM2
  • Built-in RTC, NVRAM, EEPROM
  • One digital Input channel and one open collector output channel
  • Built-in self-tuner ASIC controller on RS-485 port
  • 7-segment LED display
  • Built-in ICP DAS’s MiniOS7
  • Program download port: COM1

Introduction

The I-7188XBD-CAN series PACs (Programmable Automation Controller) are powered by 80188-40 processor with 512K bytes of static RAM, and 512K bytes of Flash memory. All of them provide several communication interfaces to adapt to various applications, such as CAN port, RS-232 port and RS-485 port. Uses can program their application program flexibly with C/C++ language because of the built-in MiniOS7 operation system. Besides, the I-7188XBD-CAN series PACs have different I/O types for users to match their requirement. For I-7188XBD-CAN, it provides 1 open collector digital output channel and 1 digital input channel. It is useful for transfer the command from differential communication interface. Therefore, it can satisfy the applications with I/O demand. Therefore, the I-7188XBD-CAN series PACs are economic and convenient solution for diversification CAN application.

Application

  • CAN bus communication application
  • Industry automation
  • Auto detecting CANopen slave devices
  • IO monitor
  • High speed data acquisition system
  • Process monitor and control
  • Factory automation
  • Laboratory automation
  • Communication switching

Specifications

CPU Module
CPU 80188, 40 MHz or compatible
64-bit Hardware Serial Number Yes, for Software Copy Protection
EEPROM 2048 Bytes (8 block, each block contains 256byte); Data retention > 100 years; 1,000,000 erase/write cycles
Flash 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles
NVRAM 31 bytes (battery backup, data valid for up to 10 years)
SRAM 512 KB
Real Time Clock Yes
Watchdog Timer CPU built-in
LED Indicators
Status 3 x Programmable
COM Ports
Ports 1 x RS-485/RS-232 (can’t be used simultaneously,
screwed terminal block)
1 x RS-485 (Self-turner inside, screwed terminal block)
Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
CAN
Controller NXP SJA1000T with 16 MHz clock
Ports 1
Baud Rate 10 k ~ 1 M bps
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Jumper for 120 Ω terminal resistor
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Power
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Mechanical
Casing Plastic
Dimensions (mm) 72 x 122 x 33 (W x L x H)
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

I-7188XBD-CAN-G     CR  I-7188 CAN Controller with Serial Port, 7-segment Display, DI and DO Channels (RoHS)
Đăng nhập
Đăng ký
Hotline: 0904251826
x