Bộ chyển đổi Modbus TCP sang 2 cổng CAN FD ICP DAS ECAN-240-FD CR
Feature
- Hardware
- Compatible with the ISO 11898-2 standard
- Compatible with CAN specification 2.0 A/B and FD
- CAN FD support for ISO and Non-ISO (Bosch) standards switchable
- CAN FD bit rates for data field from 100 kbps to 10000 kbps
- CAN bit rates from 10 kbps to 1000 kbps
- Built-in DIP-switch to enable/disable the terminal resistor
- Two CAN bus interfaces with 9 pin D-sub connector
- Software
- Web configuration
- CAN bus ID filter
- Modbus TCP Server function
- UDP responder for device discovery
- Static IP or DHCP network configuration
Introduction
The IoT (Internet of Things) has been a much discussed topic in recent years. Using the IoT concept, it is easy to integrate the environment of heterogeneous network and let all of the things into be digitized making life more convenient. In order to provide additional access to IoT applications related to industry based on the CAN bus, ICPDAS has developed a new Ethernet product, the ECAN-240-FD. The ECAN-240-FD module is a Modbus TCP to 2-port CAN FD (CAN with Flexible Data-Rate) Gateway. As its functionality, that provides communications via the Ethernet based on the Modbus TCP industrial protocol, meaning that the module can be easily integrated with an industrial network. The ECAN-240-FD module includes two CAN bus interfaces, meaning that more various CAN applications can be supported.
Application
- Factory Automation
- Building Automation
- Home Automation
- Control System
- Monitor System
- Vehicle Automation
Modbus TCP Server:
The Modbus TCP Server function is used to implement communications between a CAN device and a Modbus TCP Client. When the ECAN-240-FD module is acting as a Modbus TCP Server, the Modbus TCP Client needs to use Modbus commands based on the CAN format in order to access the ECAN-240-FD module. The ECAN-240-FD module will then translate these commands into CAN format messages and send them to the CAN networks. Similarly, when a CAN format message is received from the CAN network, the ECAN-240-FD translates the message into Modbus format, which can then be accessed using a Modbus command.
Specifications
| LED Indicators |
| Status |
1 x Power, 3 x CAN1 status, 3 x CAN2 status |
| Ethernet |
| Ports |
1 x RJ-45, 10/100 Base-TX |
| Protocol |
Modbus TCP, HTTP, BOOTP, TFTP |
| CAN |
| Ports |
2 |
| Baud Rate |
CAN bit rates: 10 k ~ 1 M bps,
CAN FD bit rates for data field: 100 k ~ 10M bps |
| Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor |
DIP switch for the 120 Ω terminal resistor |
| Specification |
ISO 11898-2, CAN 2.0 A/B and FD |
| Filter |
Yes |
| Power |
| Input Range |
+10 VDC ~ +30 VDC |
| Consumption |
1.2 W |
| Mechanical |
| Casing |
Metal |
| Dimensions (mm) |
122.0 x 160.0 x 28.0 (W x L x H) |
| Installation |
DIN-Rail |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +80 °C |
| Humidity |
10 ~ 90% RH, Non-condensing |
Download
Datasheet
Documents
Ordering Information
| ECAN-240-FD CR |
Modbus TCP to 2-port CAN FD Gateway (RoHS) |
