Bộ chuyển đổi Ethernet sang 2 cổng CAN ICP DAS ECAN-200-FD CR
Feature
Hardware
- Compatible with the ISO 11898-2 standard
- Compatible with CAN specification 2.0 A/B and FD
- CAN FD support for ISO and Non-ISO (Bosch) standards switchable
- CAN FD bit rates for data field from 100 kbps to 10000 kbps
- CAN bit rates from 10 kbps to 1000 kbps
- Built-in DIP-switch to enable/disable the CAN bus terminal resistor
- Two CAN bus interfaces with 9 pin D-sub connector
Software
- Web configuration
- CAN bus ID filter
- TCP server function
- CAN pair connection via UDP communication
- UDP responder for device discovery
- Static IP or DHCP network configuration
Introduction
The IoT (Internet of Things) has been a much discussed topic in recent years. Using the IoT concept, it is easy to integrate the environment of heterogeneous network and let all of the things into be digitized making life more convenient. In order to provide additional access to IoT applications related to industry based on the CAN bus, ICPDAS has developed a new Ethernet product, the ECAN-200-FD. The ECAN-200-FD module is an Ethernet to 2-port CAN FD (CAN with Flexible Data-Rate) Converter. As its functionality, that provides communications via the TCP and UDP functions which helps users to get/set CAN/CAN FD data via Ethernet. It also provides CAN pair connection method, which enables CAN networks to be coupled together over the Internet/Ethernet, whereby remote monitoring and control is possible. The ECAN-200-FD module includes two CAN bus interfaces, meaning that more various CAN/CAN FD applications can be supported.
Application
- Factory Automation
- Building Automation
- Home Automation
- Control System
- Monitor System
- Vehicle Automation
TCP Server Application:
The TCP Server function is used to implement communications between CAN devices and a TCP Client device. When the ECAN-200-FD module is acting as a TCP Server, the TCP Client device needs to use hexadecimal commands base on the CAN/CAN FD format, in order to access the ECAN-200-FD module. Then ECAN-200-FD module will translate these hexadecimal commands into CAN/CAN FD format messages and send them to the CAN networks. Similarly, when a CAN/CAN FD format message is received from the CAN network, the ECAN-200-FD will translates the message into hexadecimal commands and sent it to the connected TCP client device.
CAN Pair Connection Application:
The pair connection application of the ECAN-200-FD module is used to implement communication between two ends of CAN network via Ethernet. It is implemented via UDP protocol for CAN Network #1 can communicate with CAN Network #3 or #4 and CAN Network #2 can also communicate with CAN Network #3 or #4 in the same manner.
Specifications
| LED Indicators |
| Status |
1 x Power, 3 x CAN1 status, 3 x CAN2 status |
| Ethernet |
| Ports |
1 x RJ-45, 10/100 Base-TX |
| Protocol |
TCP, UDP, HTTP, BOOTP, TFTP, DHCP |
| CAN |
| Ports |
2 |
| Baud Rate |
CAN bit rates: 10 k ~ 1 M bps,
CAN FD bit rates for data field: 100 k ~ 10M bps |
| Isolation |
3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor |
DIP switch for the 120 Ω terminal resistor |
| Specification |
ISO 11898-2, CAN 2.0 A/B and FD |
| Filter |
Yes |
| Power |
| Input Range |
+10 VDC ~ +30 VDC |
| Consumption |
1.2 W |
| Mechanical |
| Casing |
Metal |
| Dimensions (mm) |
122.0 x 160.0 x 28.0 (W x L x H) |
| Installation |
DIN-Rail |
| Environment |
| Operating Temperature |
-25 ~ +75 °C |
| Storage Temperature |
-30 ~ +80 °C |
| Humidity |
10 ~ 90% RH, Non-condensing |
Specification Memo
The maximum CAN FD data rate can be exceeded depending on the concrete operating conditions (cable length, network topology, settings,...), but it can also not be reached.
Download
Datasheet
Documents
Ordering Information
| ECAN-200-FD CR |
Ethernet to 2-port CAN FD Converter (RoHS) |
